LineCam12

LineCam12

LineCam12 - Linescan SWIR Camera

The LineCam12 is an advanced linescan SWIR camera with 14-bit digital data at 37klines/s on USB3 or Camera Link™ outputs. The SWIR camera currently comes in two varieties: 250 μm tall pixels for spectroscopy and 12.5 μm square pixels for machine vision applications. The camera has incredible versatility enabling full wells from 75ke- to 100Me- with 128 steps of variation as well as integration times from 10 µs to 150s. On chip optical pixel binning (where every other detector is disconnected from the ROIC thus signal is captured by neighboring pixels) is available by command to trade spectral resolution for increased signal level. Pixel skipping or binning is also available allowing for 48k lines/s at 512 resolution in the same camera platform, activated by a simple command structure. The TEC stabilized camera has 31 non-uniformity correction (NUC) tables with 15 factory set and 16 user defined tables to enable flexibility for the given environment.

This lattice matched InGaAs array is backside illuminated enabling detection from 0.4 to 1.7 μm with no bond pads or wires in the way of your signal and minimize stray reflections found in front side illuminated arrays with many wire bonds near the active imaging area. The array can be customized to allow optical filters to be placed on the active detector area something that is nearly impossible in front side illuminated devices. We show this device working with Metaphase's light sources aphase's light sources.

Linecam12 linescan swir camera
LineCam12 Linescan SWIR Camera with Quarter for Reference
Linecam12 linescan swir camera back view
Linecam12 linescan swir cameraLineCam12 Linescan SWIR Camera with Quarter for ReferenceLinecam12 linescan swir camera back view

Datasheet

Downloadable Datasheet

Features

  • 1024x1 resolution

  • Small 12.5 µm pitch

  • USB3.0 & Camera Link Outputs

  • 250 µm or 12.5 µm tall pixel

  • <75e- read noise

  • 75ke- to 100Me- full well

  • 10us-150s integration time

  • 31 NUC tables (16 user defined)

  • F-, C-, and M42 lens mounts

  • 14 bit A/D >6000:1 dynamic range

  • Trigger control

  • Response from 0.4-1.7 µm (Backside Illuminated)

Applications

Semiconductor Inspection Using SWIR Cameras Contaminant Detection Using SWIR Camera Technology Chemical Detection Using SWIR Cameras Thermal Imaging Using SWIR Camera Technology Moisture Detection Using SWIR Cameras Agricultural Inspection Using SWIR Camera Technology

QE Curve

Quantum Efficiency (QE) Curve for LineCam12 SWIR Linescan Camera

Export

These commodities and technology are subject to the Export Administration Act as declared by the Export Administration Regulations. Diversion contrary to U.S. law is prohibited.

LineCam12-12.5-1.7T is EAR 99

LineCam12-12.5-1.7M is 6A003.b.4.a (Department of Commerce License is needed)

LineCam12

LineCam12 - Linescan SWIR Camera

The LineCam12 is an advanced linescan SWIR camera with 14-bit digital data at 37klines/s on USB3 or Camera Link™ outputs. The SWIR camera currently comes in two varieties: 250 μm tall pixels for spectroscopy and 12.5 μm square pixels for machine vision applications. The camera has incredible versatility enabling full wells from 75ke- to 100Me- with 128 steps of variation as well as integration times from 10 µs to 150s. On chip optical pixel binning (where every other detector is disconnected from the ROIC thus signal is captured by neighboring pixels) is available by command to trade spectral resolution for increased signal level. Pixel skipping or binning is also available allowing for 48k lines/s at 512 resolution in the same camera platform, activated by a simple command structure. The TEC stabilized camera has 31 non-uniformity correction (NUC) tables with 15 factory set and 16 user defined tables to enable flexibility for the given environment.

This lattice matched InGaAs array is backside illuminated enabling detection from 0.4 to 1.7 μm with no bond pads or wires in the way of your signal and minimize stray reflections found in front side illuminated arrays with many wire bonds near the active imaging area. The array can be customized to allow optical filters to be placed on the active detector area something that is nearly impossible in front side illuminated devices. We show this device working with Metaphase's light sources aphase's light sources.

QE Curve

Quantum Efficiency (QE) Curve for LineCam12 SWIR Linescan Camera

Export

These commodities and technology are subject to the Export Administration Act as declared by the Export Administration Regulations. Diversion contrary to U.S. law is prohibited.

LineCam12-12.5-1.7T is EAR 99

LineCam12-12.5-1.7M is 6A003.b.4.a (Department of Commerce License is needed)